How To Unclog a Drain Without Using Harmful Chemicals

7/18/2022 (Permalink)

Different Ways To Unclog Your Drain

Chemical cleaners may work on your clogged drain, but they can also damage your pipes. The chemicals produce heat which can cause metal and plastic pipes to warp. Using chemicals on drains that are completely blocked is especially bad since they will just sit on top of the blockage causing more damage to your Collingdale, PA pipes. There are some safe and effective alternatives to unclogging your drains, however.

1. Plunger

A sink plunger should be placed over the drain opening so that it seals the area completely. The vacuum created by the pumping action can sometimes clear the clog.

2. Wire Hanger

If a plunger doesn't work, try using a straightened wire hanger. Push the wire down into the drain and then slowly push it out and then back in several times to break up the blockage.

3. Drain Snake

You can rent a drain snake from your local hardware store in, to fix the clogged drain. Place the auger end into the drain and turn it while feeding the cable into the opening. Continue to twist the snake handle until you reach the blockage, allowing the cable to latch onto the clog. Slowly pull out the cable, along with the clog.

4. Baking Soda and White Vinegar

A great alternative to a chemical drain cleaner is using baking soda and white vinegar. The combination of the two ingredients causes a chemical reaction that eats through the blockage, without damaging the pipes. First, pour 3/4 cup baking soda into the drain, followed immediately by 1/2 cup white vinegar. Cover the opening with a rag and leave it for about 30 minutes. Boil some water and pour it down the drain slowly.

It's important to remember that if you require any sewage cleaning, call a water damage repair service as soon as possible.

You don't need harsh chemicals to fix your clogged drain if you try these quick and inexpensive solutions.